Seca 657 User Manual download pdf (Page 34)

6. Storing the scale

The scale can be stored upright to save space. Secure the scale so that it does not fall

over when stored in the upright position.

– Remove the mains unit plug from the

mains socket.

– Remove the mains unit plug from the

connecting socket on the scale.

– Press the locking mechanism on the

Western plug and remove the plug from

the socket on the electronics box.

– Fold up the ramps.

– Carefully pick up the scale by the han-

dles and move it using the castors on

the other side of the scale. When mov-

ing the scale, always hold it firmly in

both hands.

The scale is easy to steer by the centre

castor.

7. Cleaning

Clean the rubber surface and the housing as required using a domestic cleaning agent or

commercially-available disinfectant. Follow the manufacturer’s instructions.

Under no circumstances use abrasive or acid cleaners, white spirit, benzene or the like for

cleaning. Such substances can damage the high-quality surfaces.

8. What do I do if…

… no weight display comes on?

– Is the scale switched on?

– Is the plug contact of the mains unit properly connected to the scale?

– Is the plug contact for connecting the display to the scale correctly connected?

…

0.0 does not appear before weighing?

– Press the Start key again – there must not be any load on the scale – and only its feet

should be in contact with the floor.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 239 240

No comments

Seca 657 User Manual Page 34