Seca 657 User Manual download pdf (Page 28)

28

Use the arrow keys to select the TIME

menu item and then press the FUNC

key to reach the settings menu. The

year appears in the display.

– Use the arrow keys to set the correct

year.

– Press the FUNC key to confirm the year

information entered. This simultaneous-

ly switches you to the next value you

can set. Change this value too using the

arrow keys and confirm the entry using

the FUNC key.

Set all the values for the clock correctly

in the same way. The sequence of val-

ues is year, month, day, hour, minute.

On clocks with a 12-hour display, A ap-

pears on the left of the display for morn-

ing times and P for afternoon and

evening times.

– After you have confirmed the minutes

using the FUNC key, you exit the set-

tings menu automatically and the clock

continues to run at the time set.

If you also require seconds to be set accu-

rately, then proceed as follows:

– set a minute which is still to come, but

do not confirm it using the FUNC key.

As soon as the set minute starts, press

the FUNC key. At that point, the clock

will start running at 00 seconds and the

set minute.

Correct weighing

– Press the Start key with no load on the

scale.

se(a, 8.8.8.8.8. and 0.0 appear consec-

utively in the display. The scale is then

automatically set to zero and ready to

use.

– Switch weighing range if necessary (see

page 29).

– Stand on the scale and keep still.

Note

The maximum load on each individual

corner of the weighing platform is

200 kg.

– Read the weighing result off the digital

display.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 239 240

Comments to this Manuals

No comments