Seca 757 User Manual download pdf (Page 66)

66 •

3. Keep pressing the arrow key until the required

menu item appears in the display (here: attenuation

“FiL”).

4. Confirm your selection with the Enter key.

The current setting for the menu item or a submenu

is displayed (here: level “0”).

5. To change your setting or call up another submenu,

keep pressing the arrow key until the required set-

ting is displayed (here: level “2”).

6. Confirm the setting with the Enter key.

You exit the menu automatically.

7. To make further settings, call up the menu again

and proceed as described above.

NOTE

If no key is pressed for approx. 24 seconds, you

will exit the menu automatically.

Activating the Autohold

function (Ahold)

If you activate the Autohold function, the measured

result for each weighing operation continues to be dis-

played after the load has been removed. This means

you no longer have to activate the Hold function manu-

ally for each individual weighing operation.

NOTE

With certain models, this function is already

activated at the factory. If required, you can

disable this function.

1. Select the “AhOLd” item from the menu.

2. Confirm the selection.

The current setting is displayed.

3. Select the setting you require:

–On

–Off

4. Confirm your selection.

You exit the menu automatically.

hold

tare

send

hold

tare

send

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 306 307

No comments

Seca 757 User Manual Page 66